BedRug Accessories
BedRug accessories finish the job. Shop the Spray-In Adhesion Kit for beds with a spray-on liner, plus the matching tailgate mat that adds padded, no-drill coverage.
Best-Selling BedRug Accessories
Most people buy a BedRug liner and stop there. Then they find out their bed already has a spray-on coating, and the hook and loop fasteners will not stick to it. That is the gap the Spray-In Adhesion Kit fills. It is a small parts kit, not a liner, and it costs less than a tank of fuel. The second accessory worth adding is the tailgate mat, which covers the tailgate surface that a bed mat leaves bare and takes the sting out of kneeling on the gate. Search by year, make and model before you order, because the tailgate mat is cut for a specific truck.
Adhesion Kit
BedRug Spray-In Adhesion Kit (BRZSPRAYON)
A hook and loop fastener needs a smooth, clean surface to grip. A spray-on bed liner is neither, which is why BedRug liners ship with a separate kit for that case. The Spray-In Adhesion Kit brings 14 nylon fasteners, each one inch by two inches, with a sticky backing blended to bond to a textured spray-on coating. A small bottle of adhesive promoter comes in the box, and you wipe it on before the fasteners go down. The steps are simple. Clean the bed with isopropyl alcohol, apply the promoter, press the fasteners in place, then fit the liner using the installation kit that came in the liner box. No holes, no sanding, no scraping off the coating you already paid for. This is a parts kit, so check your bed first. Bare painted beds do not need it. Spray-on beds do. Made in America, covered by the BedRug limited lifetime warranty.
Tailgate Mat
BedRug Tailgate Mat
The tailgate is the part of the bed you touch most and the part a liner often leaves bare. This mat covers it in the same 100 percent polypropylene surface as the liner, over a quarter inch of foam. The foam is what your knees feel when you climb up to reach cargo. It does not absorb water, so it will not mold or mildew after rain, and oil, bleach and battery acid wipe off. It fits with hook and loop, so no holes go into the gate. Order by year, make and model. Full lineup available under BedRug accessories.
Explore More BedRug Accessories
BRZSPRAYON Spray Liner Adhesive Accessory, Black
- For beds with a spray-on liner
- 14 hook and loop fasteners
- Adhesive promoter included
- No damage to the existing liner
- Works with BedRug and BedTred install kits
BedRug Spray-in Adhesion Kit for BedRug Liners
- Works with the installation kit provided with liner
- Includes 14 one inch by two inch hook and loop fasteners
- Provides an adhesive promoter
- Does not damage your existing spray-in liner
- Made in America
RealTruck BedRug Tailgate Mat
- 100% polypropylene surface, slip and skid resistant
- Chemical resistant and does not absorb water
- Custom fitted with 1/4-inch foam backing
- Clean with a hose or vacuum
- Works alone or with any BedRug Mat
- Limited lifetime warranty; assembled in Tennessee
Advanced Engineering Inside Every BedRug Accessory
Engineered bonding and composite materials built for rough bed surfaces and daily cargo abuse.
Textured Surface Backing
Nylon hook and loop fasteners, one inch by two inches, with an adhesive backing formulated for a textured spray-on surface instead of bare paint.
Chemical Adhesive Promoter
A separate adhesive promoter, applied before the fasteners, so the bond sets on a surface that would otherwise reject it.
No Mechanical Fastening
No mechanical fastening. No screws, no rivets, no drilling, so a spray-on liner stays whole and a factory bed keeps its paint.
Cross-Line Compatibility
Compatibility across the line. The kit works with BedRug and BedTred install kits, not just one product.
Matching Closed-Cell Foam
The tailgate mat uses the same closed cell foam and 100% polypropylene build as the liner, so the color and texture match.
Find the Right BedRug Accessory for Your Setup
Start with your bed surface. Bare painted metal takes the liner straight out of the box, because the fasteners grip paint without help. A bed with a spray-on coating needs the Spray-In Adhesion Kit first, or the fasteners will lift. Both paths use the same installation kit that ships with the liner, so you are only adding a small parts kit, not a second install. The tailgate mat is a separate add-on and fits either way, since it mounts to the gate and not the floor. Order it by year, make and model, because it is cut for a specific truck and is not universal.
Comparison Table
| Feature / Detail | Spray-In Adhesion Kit | BedRug Tailgate Mat |
|---|---|---|
| What it does | Lets a liner grip a spray-on bed surface | Pads and protects the tailgate |
| What is in the box | 14 hook and loop fasteners, adhesive promoter | Mat, 14 hook fasteners, adhesive promoter |
| When you need it | Only if your bed has a spray-on liner | Any truck, with or without a liner |
| Install time | Minutes, during liner install | Minutes, on its own |
| Drilling | None | None |
| Price | $19.95 | $59.95 |
| Warranty | Limited lifetime | Limited lifetime |
BedRug Spray-In Adhesion Kit Installation
Watch how the fasteners bond to a spray-on liner. Clean the bed surface with isopropyl alcohol, wipe on the adhesive promoter primer, and lock your BedRug or BedTred securely in place.
What Truck Owners Say About BedRug Accessories
Authentic reviews and experiences documented by verified buyers on RealTruck.
"The Mat is just what I needed, great product, great fit and durable and great protection for the tailgate. I would recommend this product."
"The BedRug Tailgate Mat matches our BedRug bed liner perfectly."
"Bed mat installs without drilling any holes."
"Love the bedrug! Easy and quick to install. Highly recommended!"
Accessories FAQs
Common questions about BedRug installation kits, adhesion promoters, and tailgate mats.
Only if your bed already has a spray-on liner. If your bed is bare painted metal, the liner installs with the parts in the box and you do not need this kit.
14 hook and loop fasteners, each one inch by two inches, plus a bottle of adhesive promoter.
No. RealTruck states the kit does not damage your existing spray-in liner, and nothing is drilled, sanded or scraped off.
Yes. The adhesion kit works alongside it, not instead of it. You need both.
Yes. RealTruck lists it for BedRug and BedTred liners.
Around 30 minutes, done at the same time as the liner, using basic hand tools and isopropyl alcohol.
The surface has to be clean and dry before the promoter goes on. Wipe the bed with isopropyl alcohol first and let it flash off.
A limited lifetime warranty against defects in materials and workmanship, for as long as the original purchaser owns the vehicle.